The cost of a fence in Dallas–Fort Worth depends on three main factors: the material, the length of your fence line, and your specific city. DFW pricing varies significantly from one suburb to the next — a fence in Flower Mound can cost 20–30% more than the same fence in Mesquite or Garland.
Here's what you'll actually pay in 2026, based on real DFW market rates.
Average Fence Costs by Material (DFW)
| Fence Type | Cost Per Linear Foot | 150 ft Fence |
|---|---|---|
| Cedar Wood | $18–$40 | $2,700–$6,000 |
| Chain Link | $10–$25 | $1,500–$3,750 |
| Vinyl | $22–$50 | $3,300–$7,500 |
| Wrought Iron | $25–$60 | $3,750–$9,000 |
| Composite | $27–$55 | $4,050–$8,250 |
These ranges include materials and labor. Your actual cost depends on your city, lot conditions, fence height, and the specific contractor.
Why DFW Fence Costs Vary by City
Not all DFW suburbs are created equal when it comes to fence pricing. Here's why:
Higher-cost cities (Plano, Flower Mound, Frisco, Allen, Rockwall):
- Strict HOA requirements push homeowners toward premium materials
- Higher property values mean contractors charge more
- More inspections and code requirements
- Cedar with stone columns, composite, and ornamental iron are common
Mid-range cities (Dallas, Fort Worth, Irving, Carrollton, Richardson):
- Mix of neighborhoods from affordable to premium
- Good contractor competition keeps prices fair
- Standard cedar privacy fences are the most popular choice
- Costs track close to the DFW average
Lower-cost cities (Garland, Mesquite, Grand Prairie, Denton, Cedar Hill):
- More competitive labor market
- Fewer HOA restrictions on materials
- Cedar and chain link dominate
- Can save 10–20% compared to Collin County suburbs
Cedar Wood Fences — The DFW Standard
Cedar is king in North Texas. The combination of hot summers, severe storms, and active termite populations makes cedar the default choice for residential fences in DFW.
Why cedar works in Texas:
- Naturally resistant to rot, decay, and insects
- Handles temperature swings without warping excessively
- Weathers to an attractive silver-gray (or can be stained)
- Board-on-board design provides privacy and wind resistance
- 15–20 year lifespan with minimal maintenance
Cedar fence styles and their costs:
- Standard privacy (dog-ear pickets): $25–$35/ft — The most common option using basic pine or cedar pickets
- Board-on-board: $30–$45/ft — Overlapping boards look good from both sides and handle wind better
- Cedar with metal posts: $35–$50/ft — Eliminates the biggest failure point (wooden posts rotting at ground level)
- Pre-stained western red cedar: $45–$65/ft — Premium material with factory-applied stain for maximum longevity
- Cedar with stone columns: $55–$80+/ft — Premium look, common in Plano, Allen, and Flower Mound HOA neighborhoods
Chain Link Fences
Chain link is primarily used for commercial properties, industrial sites, and large rural/semi-rural lots in DFW. Residential use has declined, but it's still the most affordable option.
DFW chain link pricing:
- 4-foot residential: $15–$22/ft
- 6-foot residential: $20–$30/ft
- 6-foot commercial (with barbed wire): $25–$35/ft
- Privacy slats added: +$4–$7/ft
Wrought Iron & Ornamental Metal
Wrought iron is a signature look in established DFW neighborhoods — from Preston Hollow to Southlake. It's also standard for pool enclosures that need to meet Texas safety codes.
DFW iron fence pricing:
- Standard ornamental aluminum: $35–$50/ft
- Wrought iron (welded steel): $45–$70/ft
- Iron with masonry columns: $65–$90+/ft
Vinyl Fences
Vinyl has gained ground in DFW, especially in newer subdivisions where HOAs allow it. The no-maintenance appeal is strong in Texas heat.
DFW vinyl pricing:
- Standard privacy (6-foot): $30–$50/ft
- Semi-privacy: $28–$42/ft
- Ranch rail: $20–$32/ft
The Texas heat caveat: Vinyl can warp in extended periods of direct sunlight above 100°F. Lighter colors perform better. Most quality vinyl manufacturers warranty against warping, but it's worth asking about.
Composite Fences
The newest option in DFW — composite fencing made from recycled wood fibers and plastic. It mimics wood grain but won't rot, warp, or need staining.
DFW composite pricing: $35–$65/ft depending on brand and style. Trex Fencing and SimTek are the most common brands in the DFW market.
Additional Costs to Factor In
| Item | Cost |
|---|---|
| Fence permit | $25–$75 (varies by city) |
| Old fence removal | $4–$8/ft |
| Gate (standard walk) | $150–$400 |
| Gate (double drive/vehicle) | $400–$1,200 |
| Staining/sealing | $1.50–$3.00/ft |
| Survey (if needed) | $300–$600 |
How to Save on Your Fence Project
- Get 3+ quotes. DFW has hundreds of fence contractors. Competition works in your favor.
- Book in winter. November through February is the slow season. Contractors offer better pricing.
- Standard height and style. Custom work (stepped fences on slopes, unusual materials) costs significantly more.
- Skip the stain initially. Let your cedar weather for 6–12 months before staining. It actually helps the stain absorb better.
- Check your property survey. Know exactly where your property line is before building. Moving a fence after installation is expensive.
Find Fence Companies in Your DFW City
Ready to get quotes? Browse fence contractors in your area: